Kindle Cover {Tutorial}

|
Kindle Covers

As promised, here is my Kindle Cover tutorial {sorry for the delay…we had some friends come visit, and I didn’t coordinate my time before their arrival very well – but we had a blast!}.

Supplies:
1 Charm pack or assorted scraps {for outside}
5/8 yard print
Velcro
Elastic {choose a color to match the reader, not the cover – I used black}
Buckle {optional}

First, measure your reader, my Kindle Fire measures 7 1/2″ x 4 1/2″.  To determine the measurement, double the width and then add 2 1/4″ {note, the Kindle Fire that I have measure about 1/2″ thick.  If your reader is flat or nearly flat, remove 1/2″ from the width.  For the height, add 3/4″.  So, the finished measurement for the Kindle Fire cover is 11 1/4″ x 8 1/4″.

Arrange your fabric as desired for the outside.  For the cover on the top I used half hexagons. For the cover on the bottom I used blocks from The Farmer’s Wife Sampler Quilt book.

After piecing the outside {I am hoping to make a few more of these, so I’ll update with other ideas!}, layer with batting and quilt to a piece of fabric.  Next, cut to pieces of fabric 1/4″ narrower than the cover, fold these in half to make the pockets for the inside of the cover.  There should be a gap between the pieces, as shown:

Along the folded side of the left pocket, stitch the elastic in place separate from the outside of the cover.  Stitch 1/8″ and 1/4″ from the edge {by stitching in two places, the pocket does not curl up when the Kindle is placed in the cover}, as shown:

Stitch the loop side of the Velcro closure to the front of the cover.  Then, place both pockets on the wrong side of the cover and stitch 1/8″ from edge of cover outside to keep pockets in place.  Then, attach the other sides of the two elastics, plus the remaining two elastics in the corners, as shown:

Next, make the closure as you desire.  Here are the two methods I used, the buckle{honestly, I didn’t write down the dimensions because it will vary for any buckle!}:

and the flap {my flap is 2 1/4″ wide before seam allowances}:

Sew your closure to the outside of the cover before sewing the binding, like this:

Then, cut one 1 1/2″ x WOF strip for the binding.  I’m going to use a single fold binding method.  The construction is similar to the traditional double fold {see my binding tutorial}.  Sew the binding to the outside of the cover:

Then finish the binding like this:

I had originally machine finished my binding on the Farmer’s Wife Kindle Cover, but since I decided to change the white elastics out for black, I was happier with the hand stitching on the Hexagon Kindle Cover, so I hand stitched the binding back down, here’s the before:

And the after:

I think it is much improved!  Then, I just cut a piece of plastic canvas and slip it in one {or both} of the pockets to give it a nice sturdy shape!

And, if you make a cover using this tutorial, I’d love to see it!  Please post it to our Flickr group!

Similar Posts

45 Comments

  1. Jennie, is there anything you can’t do? You have such a talent and I so enjoy seeing your creations. Beautiful quilted covers and wonderful tutorials.

  2. So pretty and functional! Your tutorial is great. I always get myself all confused when thinking about the inside-out stuff. Half the time I get it wrong and have to redo it!

  3. Will you be selling these on Etsy? Love your tutorial, and I do sew, but an Etsy purchase would be so nice.

  4. I don’t have the Farmer’s Wife Sampler book (yet?). I love the kindler cover in the melon color. Can you tell me the name of the block>

  5. Ok, I’m going to try and make one today!! I’M not good at following directions. I’m a little confused when you talk about sewing the elastic strips on because in one picture you have the pocket folded and then I think it’s turned another way in the other picture. I get so confused but I’ll just jump in and figure it out as I go. I’m a beginner at projects like this which is a long way from sewing a straight line.
    Gmama Jane

  6. Very cute! Will make one but will scale it to fit my tab (when hubs gets it for me! ;)). Was wondering if interfacing (strong ones) will make it sturdy?

  7. This is a great project. I am to the point of sewing on the elastic. I am making this for someone else and do not have the Kindle Fire here. I am uncertain about how far down the side to place the elastic so that it fits over the corner and not in the screen area. I think it is about 1 1/4 inches. Does that seem about right?

    1. The elastics are actually about 2″ down the sides {if you include the part that is under the binding} and 1 3/4″ from the bottom corners {also counting the portion under the binding}. I hope this helps. I could not e-mail a reply to your comment because there is no e-mail address in your profile.

  8. Love this tutorial! I made one for a Kindle Touch and I added a pocket to the left and a slot for the light that M-Edge makes to the right. It was for my brother’s girlfriend’s graduation, but I may make one for myself now.

  9. Oh my goodness, I absolutely love these. I have a Nook, and just recently purchased a leather cover with a little stand attached so I can stand the Nook up on the table while reading if I want. I almost wish I didn’t have it because I love these so much! Good for you for making such a wonderful, useful, beautiful item. And thanks for sharing!
    Hugs,
    Julie

  10. I really wish I had a sewing machine 🙁 can’t wait to get one- this will be a project i save to my pintrest!

  11. Hi there, I just posted a blog post on using your Kindle cover blended with another blogger’s cover to make a hybrid cover for my new Kindle 8.9″. I didn’t give any of your measurements and made sure to link back to you and the other blogger so I hope that’s ok. Thanks for a great tutorial. I can’t wait to browse more of your stuff (on my new tablet, of course!) You can see the post here http://bethstrand.wordpress.com/2013/07/28/one-hybrid-kindle-cover-aka-why-i-baste-things-and-keep-my-seam-ripper-handy/

  12. Gracias, por este gran tutorial, hice un cubierta para la tablet de mi marido y quedaron todos encantados, y ahora mi nieto Santiago me pidió una para él, en cuanto tenga un momento subo las fotos. Gracias!!!!!!!!!!!!!!!1

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.