Summertime Adventures :: Snack or Toy Pouch

I’ve been meaning to make a snack or toy pouch for quite a while, so this seemed like the perfect opportunity! This little pouch is lined with Rip Stop Nylon so toys or snacks won’t get lint on them {or get your fabric wet or greasy!}, and the handle has a swivel clip so it can be fastened to a stroller, purse strap, or somewhere else convenient!

Supplies:

  • 4 – 2 1/2″ x 13″ strips for outside
  • 2 – 2 1/2″ x 1 1/2″ rectangles for zipper tabs
  • 2 1/2″ x 11″ strip for handle
  • 8 1/2″ x 13″ Pellon SF101 Shape-Flex woven interfacing
  • 2 – 8 1/2″ x 6 1/2″ Rip Stop Nylon Fabric {similar to what a kite or windbreaker would be made from, I got mine at Jo-Ann, it has little grid squares on it that you cannot see in the photographs}
  • 9″ Long Pull Zipper {my favorite type of zipper!}
  • 1 1/2″ Swivel Clip

Start by piecing the 2 1/2″ strips together lengthwise with a 1/4″ seam allowance, then fuse the interfacing to the wrong side.  Quilt as desired {I quilted 1/8″ from each seam}:

Cut in half to make 2 – 8 1/2″ x 6 1/2″ rectangles, set aside.  Fold the handle piece in half lengthwise, wrong sides together, press.

Then open and fold the raw edges toward the center, wrong sides together, press.  Open handle and fold 1/4″ of one short edge down.  Refold the handle piece along pressed lines.  Stitch along the open edge.  Feed the short folded edge through the swivel clip, stitch in place.

Stitch the handle 1/2″ from one top edge of one of the outside pieces.

Fold the two 2 1/2″ x 1 1/2″ rectangles in half {1 1/4″ x 1 1/2″}, then turn 1/4″ toward center on each side, press.  Trim zipper to length of bag and sew the rectangles onto the zipper.

Place the zipper face down on the pouch piece, the closed zipper pull should be on the same side as the handle.  Then place the nylon lining piece on top of the zipper, use a zipper foot and stitch in place.  Fold the pieces wrong side together.  Then place the zipper face down on the other outer piece {the two outer pieces will be right sides together}, and then put the remaining lining piece on top, stitch along zipper.

Fold the pieces so that the right sides of the pouch are together and the lining is together {as shown above} and stitch 3/8″ around the bag, leaving a 3″ opening along the bottom of the lining {note: make sure the zipper is partially unzipped}.  Turn the bag right sides out.  Stitch the opening closed on the outside of the lining.  Then, stuff the lining inside the bag and it is finished!

There you have a cute little pouch, perfect for any outing!

The following two tabs change content below.
a mom, sewer, quilter, and lover of all kinds of pretty fabric and handbags!

Comments

  1. 9

    says

    I have read several zipper tutorials, and I think I’m going to have to go somewhere and have someone show me in person. I can’t seem to get my head around it. Sigh. It would be so good to be able to sew a zipper correctly….

    This is a really cute bag, and so useful!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

CommentLuv badge