The Poppy Clutch :: Free Pattern

| | |

This week I’m excited to share the Poppy Clutch as part of the Windham blog hop for Kelly Ventura’s debut line of fabric, Flora. When I saw the fabric, I knew it had to become a pretty clutch, and would be perfect for those rare occasions I actually escape the house! I added a zipper detail to the front to keep things like my phone separate, so I could easily grab it, and because exposed zippers are just so pretty!

Looking for a downloadable version?

We know you may want a printable, download version of our popular freebie! You can grab it in our shop here: The Poppy Clutch PDF Pattern.

Take a look at the Poppy Clutch

Quilted Body:

Sew the body accent piece to the left of the main body piece. Following the manufacturer’s instructions, fuse the body interfacing to the wrong side of the body. Place the body flannel on the wrong side of the body piece and quilt as desired. We quilted in randomly placed straight lines. 

Repeat with second body piece, sewing the accent to the right side of the body. 

Front Zipper Pocket

Draw an 8” x 3/8” rectangle on the wrong side of pocket piece 1” below and centered on one 10” edge. Pin pocket piece, RST, 1/2” from the top of the body piece (Figure 2a). Sew around the rectangle through the pocket piece and the body (Figure 2b). Cut a straight line ¼” from each short edge of the rectangle and then clip towards the corners (Figure 2c). Push the pocket fabric throughthe opening (Figure 2d). Press thoroughly to create a window for the zipper (Figure 3a). For an added accent, we allowed some of the zipper pocket fabric to show through the window. This allows for easier pressing and gives an added feature. 

Place the zipper in the opening, and fuse or pin in place. Using a zipper foot, on the front side of the body, sew next to the opening to secure the zipper in place, double stitching the ends (Figure 3c). Turn the body piece over; trim the zipper to width of pocket if necessary. Fold the pocket piece in half and pin. Carefully stitch along the top and sides of pocket, making sure not to stitch through the body (Figure 3d). 

Shape Body and Sew Corners

Line the top and bottom of the pattern piece up with the top and bottom of one side of the body piece (Figure 4a). Trim the side and curve, and then reverse the pattern piece to trim the other side of the body (Figure 4b). 

Fold the corner along the cut “V” and sew with slightly less than a ¼” seam allowance (Figure 4c). Repeat with the second side of the body piece to shape the corners (Figure 4d). 

Use the same method to trim and sew the corners on the second body piece and both lining pieces 

Insert the Top Zipper

Fold the two zipper tabs in half (1 ¾” x 2”), wrong sides together, press. Then open and fold the short edges ¼” toward the center (Figure 5a). If necessary, trim the zipper to ½” shorter than the width of the top of the clutch (approximately 12 ½”). Place the zipper end so that it extends 3/8” past the fold of the tab, but not all the way to the center (Figure 5b). Sew the tab over the edge of the zipper and trim to zipper width (Figure 5c). Repeat for other zipper end. 

Place zipper face down the body piece with the zipper pull on the left (Figure 5d). Place one lining piece RST on top of the zipper. Sew along the top edge. Turn pieces right sides out. 

Press thoroughly or top stitch the zipper to the lining to prevent the lining from getting caught in the zipper (Figure 6a – see below). 

Place the front body piece on the back body piece, RST (Figure 6b – see below). Lay second lining on top of zipper. Sew in place as for first zipper side. 

Construct the Bag

Fold bag so the patchwork is RST and lining is RST together. Make sure the zipper is partially unzipped before sewing. At the zipper tabs, fold the tab toward the body and the raw edges toward the lining (Figure 6c). At the corners, press the seams so they are in opposite directions and nest together (Figure 6d). Press the seams on the piece with the pocket away from the pocket (Figure 7a). Sew around the outside and leave a 6” opening along bottom of lining (Figure 7b).Trim the seams next to the zipper. Turn the bag right side out and stitch opening in lining closed (Figure 7c). Tuck lining inside bag and enjoy your new clutch!

Terms of Use: 

This pattern is for personal, non-commercial use only. If you wish to sell items made from this pattern, please contact us to purchase a license. Thank you for supporting our business.

Poppy-Clutch-1

I love the pops of reds and golds with the bright turquoise, so I was glad I happened to have a goldenrod colored zipper in my stash.

Poppy-Clutch-4

I really love the wearable aspect of this fabric too, whether for a clutch or even clothes {there are some on the Windham blog, and this fabric even comes in a cotton lawn!}, it’s perfect for summer or fall {the golds and reds are amazing too!}.

Get a Printable PDF of the Tutorial

 The Poppy Clutch is perfect for an evening out, a quick trip to the store, or carrying some on the go essentials in a larger bag. It is large enough to still fit a wallet and other accessories. The front features a zipper pocket to keep important items separate from the inside. 

And, if you make a Poppy Clutch, I’d love for you to share it on social media using the hashtag #poppyclutch and tag me @cloverandviolet on Instagram.

Similar Posts

62 Comments

  1. Your inset zippers look great. Thank you for the tutorial. I would have to make a quillow with the beautiful bundle.

  2. I love the way that you used this beautiful fabric in your delightful clutch. I’m definitely making one for myself. Thanks so much!

  3. Awesome! That is the cutest little clutch! Can’t wait to try making one! and the fabric is just gorgeous!

  4. My grands will love this for Christmas. Is it okay to make for a lesson in ASG? I will give them the blog address.
    and you definite will get the credit.

  5. Jenny! This little clutch is so pretty! I love the fabric! Turquoise and orange always excite me. You did a lovely job and I am looking forward to making one of my own. XOXO

  6. Love the pop of color the zipper makes; changes a functional thing into a design element with that gorgeous fabric!

  7. This is such a cute little clutch – would make perfect Christmas gifts. Thank you for the tutorial.

  8. Lovely clutch! It will make great little Christmas gifts using the fad giveaway bundle-at least that’s what I would do with the Flora fat quarter bundle.

  9. lovely tutorial as usual can’t wait to try it. i love the fabric you used for the clutch it’s really pretty.

  10. Gorgeous fabric & perfectly matched to the clutch pattern. This is a winner for sure. Thanks for the tutorial, it’s on my to do list 🙂

  11. I LOVE the fabric – and especially the pattern. Haven’t attempted the zippers yet, but will try it now. Thanks for your great blog!

  12. Love everything about this! I’m a fairly new sewist, and have made a few simpler bags, but this adds details that make it stand out. I can’t wait to try it!

    🙂

  13. Darling bag. I don’t carry bags a whole lot. I have to carry around a diaper bag for now, but I will check out the tutorial for a later point in my life. I love this fabric. If I had it, I think I would use it as a start to a herringbone quilt for my mom. She would just love this fabric.

  14. The perfect skill-builder! Shared your Poppy clutch on Crafts on Display today. I love how you teach inset zippers and fabric tabs on a small, manageable scale. Great work!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.